← Back to list

99 Honda Accord p0122 ideling at 2000 RPM.

Model: 99 Honda Accord Fault Code: P0122 Posted: 2015-08-17 11:46

I have a 99 Honda Accord that I replace the TPS last week and now the car is ideling at 2000 RPM. I put a scan and the code is PO122. I need some help please.

Related fault codes
P0122
Comments (4)
Anonymous 2015-08-17 13:23

Check TPS for proper operational voltage with scan tool or v meter. Did you replace the original TPS for this error code or a different one?

Anonymous 2015-08-17 14:15

At first the vehicle was ideling high and low (surging) and someone recomend that i change the TPS and i did with a new one. i also check the volts and it reads 5.

Anonymous 2015-08-17 16:08

Check TPS signal voltage to PCM should be approx .5v at idle. Do this with TPS connected, test leads across sig and sig ground. Easier done with scan tool than v meter. If TPS sig normal than error code probably generated when TPS was changed. Reset code/see if it returns. Regarding the high idle, if TPS sig is good to the PCM then check IAC. If you can't read the IAC data on a scanner then best you can do is remove and clean/replace.

Anonymous 2015-08-18 08:37

Thank you, I will try it this Saturday morning due to i get out of work too late.