← Back to list

1997 Ford Escort P1443 and P1131 OBD2 Codes: Causes, Diagnosis, and Fixes

Model: 1997 escort Fault Code: P1131 Posted: 2008-02-05 10:45

My 1997 Ford Escort (2.0L manual transmission) has been intermittently throwing the P1443 and now also P1131 fault codes. Recently, the car began running rough at stop signs and traffic lights, with the idle dropping significantly—almost as if it was about to stall. After re-scanning, both P1443 and P1131 are present. P1131 is typically associated with a faulty upstream oxygen (O2) sensor, while P1443 relates to the evaporative emission control system—specifically the EVAP purge valve or its associated circuit. Given the age of this vehicle, it's likely that both the EVAP purge valve and the upstream O2 sensor are worn or failing. What should I do? Can these components be tested before replacement, or is buying new parts the only option? Thanks, Darrell

Related fault codes
P1131P1443
Comments (2)
Anonymous 2008-02-05 11:40

For a 1997 Ford Escort, it's highly probable that both the EVAP control valve and the upstream O2 sensor are faulty. Begin by inspecting all vacuum hoses in the EVAP system for cracks or disconnections. A vacuum leak can trigger P1443. Check whether your OBD2 scanner can graph the oxygen sensor signals—this helps determine if the sensor is functioning properly. If you have access to a scan tool, monitor the O2 sensor data in real time. You can also perform a simple test by removing the upstream O2 sensor and using a multimeter to check its output voltage under different engine load conditions. Additional resources: - Use a digital multimeter (DMM) and propane torch for testing. - Refer to Paladin Micro’s guide on O2 sensor testing: http://www.paladinmicro.com/PalMFrame00.htm?wks=MIL Scroll down to the '02 Testing' section under the left menu. Good luck—please update us with your findings.

Anonymous 2008-02-16 19:00

darrell5203 wrote: My 1997 Ford Escort (2.0L manual transmission) has been intermittently throwing the P1443 and now also P1131 fault codes. Recently, the car began running rough at stop signs and traffic lights, with the idle dropping significantly—almost as if it was about to stall. After re-scanning, both P1443 and P1131 are present. P1131 is typically associated with a faulty upstream oxygen (O2) sensor, while P1443 relates to the evaporative emission control system—specifically the EVAP purge valve or its associated circuit. Given the age of this vehicle, it's likely that both the EVAP purge valve and the upstream O2 sensor are worn or failing. What should I do? Can these components be tested before replacement, or is buying new parts the only option? Thanks, Darrell The EVAP purge control valve can become sticky over time. Check all hoses for cracks or blockages. When powered at 12V, the valve should fully open; at 6V, it should be partially open; and at 0V (off), it should close completely. If you remove the upstream O2 sensor, you can test its functionality directly using a scan tool or multimeter. A proper OBD2 scanner allows access to live sensor data for accurate diagnosis. Tools needed: digital multimeter (DMM) and propane torch. More detailed testing info available at Paladin Micro: http://www.paladinmicro.com/PalMFrame00.htm?wks=MIL Use the left navigation menu and scroll down to '02 Testing'. ATB Aeroman