lordbancs
2026-02-13 15:39
Have the same issue. I think the only fix is to powder coat them
The_Soldiet
2026-02-13 15:48
Not related to this post at all, but that color is just so sick. I'm awaiting my M3P with the standard white, but I'm thinking of going quicksilver.
Sfkn123
2026-02-13 15:52
Aw dang, I wonder if I need to reach out to a professional wheel repair.
Sfkn123
2026-02-13 15:53
I think that quicksilver looks great. My previous Teslas were gray and blue, but I've always loved silver with black wheels.
Fabulous_Scale4771
2026-02-13 16:20
Sand, putty, prime, paint, done
Safye
2026-02-13 16:40
Meguiar’s Ultimate Compound and elbow grease.
If they don’t come out after that then you unfortunately were a little too rough with taking the covers off
Acceptable_Main_5911
2026-02-13 16:40
Tolerance and acceptance. I have the same very minor leftover but kills me when I see it. Then I realize the only time I can see it is when I’m actively at eye level cleaning my wheels.
no_butseriously_guys
2026-02-13 17:12
I curbed mine slightly and was able to effectively hide the damage with touch up paint of the same color as the wheel. You can consider that before you go ham and refinish the entire wheel
Katmilla
2026-02-13 17:23
The proper way was to remove the wheels, snip the wires holding them in fro the back and carefully removing them right after pickup.
rattler843
2026-02-13 17:51
If the scratch is deep enough to catch on your fingernail it can’t be completely buffed out. This is why never bothered removing the aero inserts on my M3P. The scratches would bother me more than just leaving the inserts on
doesnotlikeketchup
2026-02-13 18:06
I want to see that evo
SkyCaptainStarr
2026-02-13 20:15
Quick 15 minute job no doubt
HEYitsBIGS
2026-02-13 22:23
That evo though
hyp36rmax
2026-02-13 22:59
Worthy two car setup. 🔥🔥🔥
Seansong82
2026-02-14 02:06
If you used a metal pry bar and not a plastic one, that was most likely the mistake.
waltamobile
2026-02-14 03:52
Nice Evo. Wish I had kept mine. 🫤
bjdraw
2026-02-14 16:02
Exactly
bjdraw
2026-02-14 16:02
I’m convinced some get scratched when they install the covers.
gregdobs
2026-02-15 14:23
Quicksilver or Ultra Red on the Performance is the way to go. I’d strongly consider switching if you’re feeling this way. Not easy to change it up once delivered.
The_Soldiet
2026-02-15 14:28
Only problem is, quick and red is a 2k USD option where I live.
Jimmy_Durango
2026-02-15 22:22
They look like scratches but they polish off. I removed all mine. Paint on the wheels is undamaged. I used a microfiber and WD40 (very little) and it’s all gone.
Nervous-Location-655
2026-02-17 21:06
Dream setup 🥹