Graphene ceramic coating really makes ultra red pop.

is this a performance? what's the badge on the front lip? looks different than the M3P

It’s a similar looking badge but not the same, mine is a LR. I liked the color, size and design of the emblem so I added it to the front of my body kit just for aesthetics.

Where’s ur body kit from?

Yofer design shipped from over seas.

Looks great! Lowering springs or coil-overs?

Eibach springs.

Love the fitment of the wheels/tires. What spec are you running. I also have an ultra red!

Thanks! The wheels and tires are stock photons without the hub caps. I added some Bonoss spacers 15F/18R. It’s definitely as flush as can be without custom wheels.

Looks really clean. I like you didn’t go overboard with the kit.

Appreciate it. OEM+ is how I like to describe it 😅

Nicest looking I’ve seen for the not performance front end, very nice!

Thanks, I’ve never really been a fan of using just the add on splitters that just sit under the car all around and stick up on the corners.

Doesn’t look ridiculous, fits with the car

I did the graphene ceramic spray and it was really good but then I took it to my detailing shop and they did a 2 stage correction, Gtechniq ceramic ultra and PPF’d the front end and that correction really took it to the next level. https://i.imgur.com/PYkjqeb.jpeg The worst part about the graphene spray though is that it clogs up the spray nozzle after it sits for a little bit. I emptied it out into a different spray bottle, and the graphene material basically turned into a solid silly putty-like mush at the bottom of the bottle with the rest of the liquid separated above it. I tried shaking it up to mix it back up and it wouldn’t work. They sent me another bottle without any hesitation but I don’t know if I’ll use it again.

>Love the side skirts on your Tesla! Mind sharing where you bought them?

All ceramic coatings are supposed to be applied after a paint correction so it’s understandable if you saw better results if the original coat was not perfect to begin with. I use the suede applicator with small drip bottle (not spray) and have been detailing my own cars for a little while now. I didn’t need much paint correction on the new car which was nice. Adam’s graphene has been just as good or even better than previous coatings like ceramic pro which I’ve used in the past. In terms of durability, and hydrophobic properties and overall look.

You will need to find someone to drop ship them from over seas. Look up Yofer design body kit.

Love it!

Suspension and mirrors?

Eibach springs and MPP rear control arms. Mirrors are just gloss black covers.

I wish I had it done when I bought mine

It’s never too late if you are referring to ceramic coating. Just need a good detail and assess whether paint correction is also needed. I’ve done a few pre owned cars with no problems except that it took a lot longer to get the paint prepped.

What aero kit is that? nice bro‼️

I have the same kit and have yet to install it. Did you have to drill into the car? How much double sided tape did you use?

I used my own heavy duty automotive tape for any surfaces that made contact firmly. The front lip, rear diffuser and spoiler did not require drilling and only use OEM mounting points with clips or screws. I used self tapping screws only for the rear canards and side skirts to further strengthen the hold. About 6 on each side skirt and one for each canard. The kit has marking and pre drilled holes exactly where those go. This things isnt going to move based on fitment alone. You are going to love this kit! Good luck.

Thank you, I will attempt to install it soon. 🙌🏼

It rather looks like they come from a wheelbarrow.

That kit makes it look almost as good as the OEM performance and looks natural, I'm a big fan.

Haha thanks. I personally like all aspects of this aero kit better than the basic performance body styling.

Where did you get the red/black emblem on your front bumper ?

Yofer design aero kit