Tesla Model 3 Performance (Highland) + APEX VS-5RS Wheels

Ultra Red 2024 Tesla Model 3 Performance (Highland) AST 40mm Lowering Springs APEX VS-5RS Wheels - Motorsport Gold - 19x9.5 +29 265/35/19 Bridgestone RE-71RS Tires

So clean 🧼. Nicely done

Super tasteful! Looks amazing!

All 4 wheels/tires are the same size? Are spacers required to make them fit like that so they look right?

Is it harder to get in an out of certain steep driveways? I have an underground garage that my car barely gets over with out scraping. I wonder if I did this would I even be able to bring it in!

I love the stock wheels on the m3p. And the ride quality is comfortable enough that I don't feel like changing them out for something smaller. These do look nice though.

Only problem with the stock is the plastic pieces

Damn, my favorite color and my favorite wheels. You nailed it, looks amazing.

Looking good Danny!

Those tires do not go with the red 3 at all. Tint looks good tho

Yes it's a 19x9.5 +29 / 265/35/19 square setup. Rear is running a 5mm slip-on spacer just to balance out the additional negative rear camber. This set up sits flush due to its spec, and this is plug and play for all Tesla Model 3/Y.

Yes, we love the stock wheels this time around also! They're forged and look great. We offer spacer kits for those who like to flush out the factory wheels for a nicer stance: [https://modelplusstudio.com/products/highland-model-3-performance-flush-stance-kit?variant=45530550534318&\_pos=1&\_psq=perfect+&\_ss=e&\_v=1.0](https://modelplusstudio.com/products/highland-model-3-performance-flush-stance-kit?variant=45530550534318&_pos=1&_psq=perfect+&_ss=e&_v=1.0)

Once removed, they look fantastic!

Thank you!

Yes, lowering the car further will require more attention for potholes, curbs and uneven surfaces. But all worth it for this type of stance IMO!

This color combo just works! Thank you.

Thank you! :)

I think it looks better but usually everyone leaves the small plastic pieces on because of the tiny holes. Makes it look a little weird imo

In agreement: https://preview.redd.it/ru9da0qfl0cg1.jpeg?width=3318&format=pjpg&auto=webp&s=e9f188b2b80ef6c733eabe4a32b2b7b370b5edff

Thank you!

Looks so good 🔥

Thank you!

Oooh. Would these fit a 2021?

Yes they will.

Beautiful setup! Appreciating the finish of the rims contrasting warmly with the body, unlike a lighter finish being a little too jarring to look at imo. The meaty tire setup is a nice functional detail too with those straight sidewalls. I love the thought behind the build.

Thank you! I agree if the wheels were silver or brushed it would be bit harsh. This is a dedicated autocross setup for us, hence the more aggressive Bridgestone RE71RS tires.

Nice to see you’re using the tires to its potential because otherwise that’s an expensive daily. Back in my autoX days the most competitive tire was RE-71R for dry and we’d swap to Conti DWS for wet days. Always wondered how an EV would handle on a generally short and tight course. Have fun and good luck on the course!

She goes! What it lacks in quick direction changes is made up in corner exits and and stretch of straight. It's almost like cheating :D And she can get loose: [https://youtube.com/shorts/ET2ZrvLUHaA?si=cUx6PiagmxRHEfFR](https://youtube.com/shorts/ET2ZrvLUHaA?si=cUx6PiagmxRHEfFR)

If i spend money on rims, I'd make sure they don't look like the free stock rims from the last generation model 3. The color doesn't go hand in hand with red too. I do like the wheels though, solid choice, but not on a model 3.

Thanks!

Danny taking over Reddit now?! Hell yeah! Been hyping you up since I got my wheels from you.

Too clean!! Nice to see you on here Danny 👋

He’s the best! Ton of wheel and fitment knowledge and just a really nice guy. I’m on my 6th set of wheels for the Tesla and every transaction was flawless from model+

I appreciate you guys all the way! Thank you so much. I'm happy to serve this community.

haha thanks I think I know who this is ;)

Na

I have 9.0 width rims with ET33. I'm planning on fitting same size tires as you. Should I expect any problem with clearing all of the front suspension?

Although 265 on a 9" wide wheel is considered oversized, You should not experience clearance issues. If you do a small spacer should resolve that.

Never used spacers. Even with 5mm, will I be able to just bolt on the wheel through it?

Assuming it's Model 3 Performance, you will have no issues using these [5mm slip-on hub-centric spacers](https://modelplusstudio.com/products/stepped-hub-lip-kit?variant=46327027466414). Even with factory lug nuts, you will have sufficient thread engagement.