BYD Dash Cam ATTO 2 Comfort

En otros paises se comercializa como Yuan Pro y deberia traer DILINK 3.0: https://preview.redd.it/tdybuthoo68g1.png?width=828&format=png&auto=webp&s=a26eb743c5811dc2da5fd39daa04236b03326fda

Thanks, but what does this mean? Do other cars have a different interface, do they have D-Link 2.0?

If I'm not mistaken, I think my version is called Yuan UP in China.

Cam you take a photo where that is in the car?

https://preview.redd.it/a5y3e6noe78g1.jpeg?width=3024&format=pjpg&auto=webp&s=69bf0915b1490e9937a5b5e68b42ef17487e8504 Here, I removed the right driver's panel; the control unit is in the center of the tunnel.

Si, depende del MCU de tu auto, yo tengo el BYD Destroyer 05 (KING en mi pais Mexico) y utiliza DILINK 3.0 que tiene la interfaz azul para la dashcam y se la acabo de poner: https://preview.redd.it/7qgfwhkzf78g1.png?width=574&format=png&auto=webp&s=298d1ff9baa00e85b6fa429cabc8eaeef8413341

My car is the first version, which no longer has the rotating screen. We were told that they will no longer make it like this. I probably have new generation hardware, because everything is completely different in terms of connections. It doesn't look at all like the photos in terms of connector colors and layout.

Maybe you need the **HC-3776940M** camera module or **STEX-3776940** after my understanding these are for the Sealion 7 but by the photos you have posted it looks similar. I will receive my Atto 2 Comfort in a few weeks and I will keep you updated. I also have the **EL3776900** with the blue connector so I think I will be in the same situation. Could you make some photos from different angles of the mirror part where the camera needs to be mounted and as well of the infotainment ports so we can have an idea of what you have there? Thank you!

I've received partial, unofficial information. The cable probably already exists, but it's different, and it's probably in the SOS area. The cover has circular holes and two slots for removing it. I think they've done some "trick" to complicate things. It could be that it starts with one shape and arrives with another, but that's just my guess. There are no other free coaxial connectors. From what I understand, the Dash-Cam module has additional power (wake-up, warm, etc.), so the only "compatible" 2-pin coaxial connector is the white one or some cable already connected, but I'm not sure which one!

Keep us updated. When I will receive my car I will tell you more. Till then it will be useful to make some more photos especially of the infotainment part because the one you made the flash burned the photos so I can't see what type of connection is it? The bellow photos is the **STEX-3776940** https://preview.redd.it/nfemeagjs3eg1.jpeg?width=800&format=pjpg&auto=webp&s=de2b0d7a514094ba98d61519501728769d2f60d5

The brown connector has teeth arranged differently from the white connector on the camera, and it's white. I think there's a reason for this. The white connector is compatible with the blue connector. Someone has already mistakenly connected the DashCam to the connector, bringing up the app but not seeing anything. I still think that either the cable is already pre-wired but isn't blue or the right shape, or it connects to a white connector with 2 pins. In any case, the white connector is exactly the same as in this photo. https://preview.redd.it/txv3ugfpo5eg1.jpeg?width=748&format=pjpg&auto=webp&s=9a2f83283b3f2547342591cf1a6d65ffa57e3650

It seems to me that on the picture you posted both white and blue have coaxial if I'm seeing correctly. I have a hard time understanding which connector is which. I also read on facebook from another user that he received his Atto 2 Comfort and comes with DiLink5.

I don't know how you can tell, but how did you know it has a 5? Maybe, because this unit seems very different in terms of connections from the others, but how can you tell which DiLink version it is? Because I can't find any trace of this information in the information.

As I said it seems the Atto 2 Comfort comes with DiLink5 confirmed by a user. https://preview.redd.it/j50ejz7hmceg1.jpeg?width=876&format=pjpg&auto=webp&s=35b4b5136b3ea231a02350ebf2b2b93d5e9903cc

https://preview.redd.it/206kto6ynceg1.jpeg?width=876&format=pjpg&auto=webp&s=82ea56d2955106337d7807602e984fffa1b9a3a1 Here you can see. The Yuan Up 2025 modell has DiLink5.0

Thank you, we have to wait for someone to try to connect to the white connector or check near the SOS dashboard that there is not already the hidden new generation cable, because near the mirror there is nothing

Haven't you checked if the cable can be inserted into the white plug? For me it looks the same.

it is inserted, some users had mistakenly inserted it in the other versions (act 3, dolphin), but it showed a corrupted video signal.

io ho una ATTO2 comfort, ho inserito il cavo della dashcam (quello blu) nel connettore bianco (operazione non molto agevole). Una volta connesso e resettato il sistema (pressione prolungata del tasto volume) la dashcam non viene rilevata. Sul display non appare nessuna icona relativa alla dashcam.

I think this version will be a tough one. Have you checked under the plastic near the SOS module? I think there are some hidden cables there. They didn't put them under the mirror, but under the plastic of the roof controls. I spoke unofficially with the dealer yesterday, and he said the wiring is already pre-wired. My question is, what connector will it be?

appena ho un pò di tempo provo a smontare la plastica sotto al modulo SOS (sperando che si rimuova facilmente senza fare danni) e vedo se ci sono cavi liberi con un connettore da utilizzare. Se c'è un cavo libero, poi ci sarà da indagare che tipo di dashcam utilizzare. Intanto questa che ho comprato su aliexpress (con connettore blu) faccio il reso e poi si vedrà. Se hai altre informazioni condividile, farò altrettanto io.

Absolutely!

Stamattina ho provato senza successo a smontare la plastica sotto al modulo SOS per verificare la presenza di qualche cavo da utilizzare per la dashcam, purtroppo non sono riuscito a smontarle la plastica, è ben incastrata ed ho avuto paura di danneggiare qualcosa. Ho provato senza nessun attrezzo particolare, solo un cacciavite piatto e le mani, non ho disponibili nessun attrezzo di plastica specifico per far leva tra le plastiche. Proverò a cercare se c'è qualche video dove viene mostrato da che lato del modulo aprire e dove far leva per separare le plastiche. Qualcuno ha qualche indicazione?

https://preview.redd.it/zmqdp47ktvfg1.jpeg?width=1179&format=pjpg&auto=webp&s=7f495738377818a71b0fee7b8f59ae97bb002d61 I found a photo showing the plastic panel, so you can also see where the teeth are positioned to remove it.

Your car has the rotating screen? I thought in Comfort trim the screen is not rotating.

My car doesn't have a rotating screen from what I understand; BYDs don't have them anymore. The older Act 2 versions still have them, but they haven't received any physical updates.

ci riproverò nei prossimi giorni, cerco di procurarmi qualche attrezzo per non danneggiare le plastiche

Hi! Future Atto 2 Comfort owner in Spain here, and very interested in the dashcam. Let’s see if we’re lucky and it’s possible! Thanks everyone for the information.

Hola muy buenas , yo también me compré un atto2 comfort y el conector que veo es blanco y juraría que no tiene los dos pines https://preview.redd.it/2tau8wbo4pkg1.jpeg?width=1206&format=pjpg&auto=webp&s=0330b0447715647411d15b372a5321122634ace0

Yo ver solo le veo ese blanco https://preview.redd.it/fic6mr0kjpkg1.jpeg?width=1206&format=pjpg&auto=webp&s=cab69a08c36c0f809466d651b08baf21457ca9b2 Y queda corto, las cámara yo creo que debe de traer un cachito de cable

Scusa, ma quel connettore dove l’hai trovato puoi fare una foto da distante, dove si vede meglio? Grazie.

Este finde lo vuelvo a desmontar y le saco está a la izquierda del lado del espejo retrovisor ves unos cables justo al lado de unas brida, y si te fijas ya ves un cable fino negro que se mete en un mazacote que estás envuelto en una cinta negra, y si tocas con el dedo ya notas el conector.

where did you find this cable exactly? can you take a better photo of the connector?

https://preview.redd.it/ww94i0jggwkg1.jpeg?width=800&format=pjpg&auto=webp&s=be3486356e216edcf0c5cdb29e425cf86732968c please take o photo of the connector from an angle to see if it fits in this type.

Sí puedo mañana lo desmonto de nuevo y saco las fotos

awesome. thank you.

https://preview.redd.it/z3bzvfqrl1lg1.jpeg?width=2268&format=pjpg&auto=webp&s=dd9e7ab089828cffccbdc37bbb8ce3dc581ec296 Solo tiene para un cable

https://preview.redd.it/se2689kvl1lg1.jpeg?width=2268&format=pjpg&auto=webp&s=cb10cbe92fe163f61709f1e783538053a00105bb Está en el lado del piloto pero envuelto en cinta negra

https://preview.redd.it/vz6856uqn1lg1.jpeg?width=4032&format=pjpg&auto=webp&s=40b817de18318b3ed766db8b2e33ddd2ba70e8e1

https://preview.redd.it/f4hkcz1vn1lg1.jpeg?width=2268&format=pjpg&auto=webp&s=28b61a9dd5d2b436368ba559af994173b40a5099

Ora bisogna capire se è in vendita la cam originale per quel connettore, hai foto frontali del connettore? Proverò a vedere se pure io se lo trovo! Grazie

https://preview.redd.it/umtkre2wu9lg1.jpeg?width=2268&format=pjpg&auto=webp&s=a2a1da67023c90a7518e864004fa22d145d050ca Esa

I think it's this one according to the connector from the photo [https://nicebyd.com/products/byd-oem-dashcam-for-byd-sealion-7](https://nicebyd.com/products/byd-oem-dashcam-for-byd-sealion-7) or this one [https://nicebyd.com/products/byd-oem-dash-cam-for-byd-sealion-7-australian](https://nicebyd.com/products/byd-oem-dash-cam-for-byd-sealion-7-australian)

Penso che per questo connettore non ci sia ancora nulla in commercio.